请教:2007年上半年《网络工程师》上午试题(参考答案版)第1大题第53小题如何解答?【题目描述】● （57）能够显示路由器配置了哪种路由协议（57）A. R1 (config)# show ip route B. R1 > show ip routeC. R1 >show ip protocol D. R1 (config-if)# show ip protocol

题目

请教:2007年上半年《网络工程师》上午试题(参考答案版)第1大题第53小题如何解答?

【题目描述】

● （57）能够显示路由器配置了哪种路由协议

（57）

A. R1 (config)# show ip route

B. R1 > show ip route

C. R1 >show ip protocol

D. R1 (config-if)# show ip protocol

更多“请教:2007年上半年《网络工程师》上午试题(参考答案版)第1大题第53小题如何解答? 【题目描述】 ● （57）能够显示路由器配置了哪种路由协议（57） A. R1 (config)# show ip route B. R1 show ip route C. R1 show ip protocol D. R1 (config-if)# show ip protocol”相关问题

第1题

能够显示路由器配置了哪种路由协议。A．R1(config)#show ip routeB．R1＞show ip routeC．R1＞show ip protocolD．R1(config-if)# show ip protocol

点击查看答案
第2题

如果想知道配置了哪种路由协议，应使用的命令是（）。A.router>showrouter protocol B.Router (ciinfig)>show ip protocol C.router (config)>show router protocol D.router >show ip protocol

点击查看答案
第3题

阅读以下说明，回答问题1～3，将解答填入对应的解答栏内。某公司的分支机构通过一条DDN专线接入到公司总部，地址分配和拓扑结构如图5-1所示。在两台路由器之间可以使用静态路由，也可以使用动态路由。下面是分支机构路由器R1的配置命令列表，在空白处填写合适的命令/参数，实现R1的正确配置。Router＞enRouter＞conf termRouter(config)hostname R1Router(config)int e0R1(config-if)ip address (1)R1(config-if)no shutdownR1(config-if)int s0R1(config-if)ip address [ (2) ]R1(config-if)no shutdownR1(config-if)clock rate 56000R1(config-if)exitR1(config)ip routingR1(config)ip route [ (3) ]R1(config)ip classlessR1(config)exitR1copy run start

点击查看答案
第4题

On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24

点击查看答案
第5题

Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0".Whic h of the following is most likely to have caused this output to occur on R1?（）A. R1 has been configured with an ip default- network 2.0.0.0 command.B. R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.C. R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.D. Another router has been configured with an ip default - network 2.0.0.0 command.E. Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

点击查看答案
第6题

A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）A. show ip eigrp topologyB. show ip eigrp topology all - linksC. show ip route eigrpD. show ip route eigrp all - linksE. show ip eigrp topology all - learned

点击查看答案
第7题

——能够显示路由器配置了哪种路由协议。A．R1(config)#show ip routeB．R1>show ip protocolC．R1>show ip routeD．R1(config—if)#show ip protocol

点击查看答案

网络工程

题目

第1题

第2题

第3题

第4题

第5题

第6题

第7题

相关内容